|
Device
|
The DeviceAlarmStateAdapter type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
|
AcknowledgedTransitionHysteresisDelay | Gets or sets delay time, in minutes, before transitioning the Acknowledged state back to Good. |
|
|
AlarmMinutes | Gets or sets the time, in minutes, for which to change the device state to alarm when no data is received. |
|
|
AutoStart |
Gets or sets flag indicating if adapter should automatically start or otherwise connect on demand.
(Inherited from AdapterBase) |
|
|
ConnectionInfo |
Gets connection info for adapter, if any.
(Inherited from AdapterBase) |
|
|
ConnectionString |
Gets or sets key/value pair connection information specific to this AdapterBase.
(Inherited from AdapterBase) |
|
|
DataSource |
Gets or sets DataSet based data source available to this AdapterBase.
(Inherited from AdapterBase) |
|
|
Enabled |
Gets or sets enabled state of this AdapterBase.
(Inherited from AdapterBase) |
|
|
EnableExternalDatabaseSynchronization | Gets or sets the flag that determines if an external database connection should be enabled for synchronization of alarm states. |
|
|
ExternalDatabaseCommand | Gets or sets the external database command used for synchronization of alarm states. |
|
|
ExternalDatabaseCommandParameters | Gets or sets the external database command parameters with value substitutions used for synchronization of alarm states. |
|
|
ExternalDatabaseConnectionString | Gets or sets the external database connection string used for synchronization of alarm states. Leave blank to use local configuration database defined in "systemSettings". |
|
|
ExternalDatabaseHysteresisDelay | Gets or sets the delay time, in minutes, before reporting the external database state. |
|
|
ExternalDatabaseHysteresisMinimumState | Gets or sets the minimum state for application of ExternalDatabaseHysteresisDelay. Defaults to setting Good and Alarm states immediately and applying delay to all other states. |
|
|
ExternalDatabaseMappedAlarmStates | Gets or sets the external database mapped alarm states defining the {MappedAlarmState} command parameter substitution parameter used for synchronization of alarm states. |
|
|
ExternalDatabaseProviderString | Gets or sets the external database provider string used for synchronization of alarm states. |
|
|
ExternalDatabaseReportSingleCompositeState | Gets or sets the flag that determines if external database should report a single composite state or a state for each device. |
|
|
FallBackOnLocalClock |
Gets or sets flag that determines whether to fall back on local clock time as real time when time is unreasonable.
(Inherited from FacileActionAdapterBase) |
|
|
FramesPerSecond |
Gets or sets the frames per second to be used by the FacileActionAdapterBase.
(Inherited from FacileActionAdapterBase) |
|
|
ID |
Gets or sets numeric ID associated with this AdapterBase.
(Inherited from AdapterBase) |
|
|
InitializationTimeout |
Gets or sets maximum time system will wait during Start for initialization.
(Inherited from AdapterBase) |
|
|
Initialized |
Gets or sets flag indicating if the adapter has been initialized successfully.
(Inherited from AdapterBase) |
|
|
InputMeasurementKeys |
Gets or sets primary keys of input measurements the adapter expects, if any.
(Overrides FacileActionAdapterBaseInputMeasurementKeys) |
|
|
InputSourceIDs |
Gets or sets Source values used to filter input measurement keys.
(Inherited from FacileActionAdapterBase) |
|
|
IsDisposed |
Gets a flag that indicates whether the object has been disposed.
(Inherited from AdapterBase) |
|
|
LagTime |
Gets or sets the allowed past time deviation tolerance, in seconds (can be sub-second).
(Inherited from FacileActionAdapterBase) |
|
|
LatestMeasurements |
Gets reference to the collection of absolute latest received measurement values.
(Inherited from FacileActionAdapterBase) |
|
|
LeadTime |
Gets or sets the allowed future time deviation tolerance, in seconds (can be sub-second).
(Inherited from FacileActionAdapterBase) |
|
Log |
Log messages generated by an adapter.
(Inherited from AdapterBase) |
|
|
MeasurementReportingInterval |
Gets or sets the measurement reporting interval.
(Inherited from AdapterBase) |
|
|
MonitoringRate | Gets or sets monitoring rate, in milliseconds, for devices. |
|
|
Name |
Gets or sets the name of this AdapterBase.
(Inherited from AdapterBase) |
|
|
OutputMeasurements |
Gets or sets output measurements that the adapter will produce, if any.
(Overrides AdapterBaseOutputMeasurements) |
|
|
OutputSourceIDs |
Gets or sets Source values used to filter output measurements.
(Inherited from FacileActionAdapterBase) |
|
|
ProcessedMeasurements |
Gets the total number of measurements handled thus far by the AdapterBase.
(Inherited from AdapterBase) |
|
|
ProcessingInterval |
Gets or sets the desired processing interval, in milliseconds, for the adapter.
(Inherited from AdapterBase) |
|
|
RealTime |
Gets the most accurate time value that is available. If UseLocalClockAsRealTime = true, then
this function will return UtcNow. Otherwise, this function will return the timestamp of the
most recent measurement.
(Inherited from FacileActionAdapterBase) |
|
|
RequestedInputMeasurementKeys |
Gets or sets input measurement keys that are requested by other adapters based on what adapter says it can provide.
(Inherited from FacileActionAdapterBase) |
|
|
RequestedOutputMeasurementKeys |
Gets or sets output measurement keys that are requested by other adapters based on what adapter says it can provide.
(Inherited from FacileActionAdapterBase) |
|
|
RespectInputDemands |
Gets or sets flag indicating if action adapter should respect auto-start requests based on input demands.
(Inherited from FacileActionAdapterBase) |
|
|
RespectOutputDemands |
Gets or sets flag indicating if action adapter should respect auto-start requests based on output demands.
(Inherited from FacileActionAdapterBase) |
|
|
RunTime |
Gets the total amount of time, in seconds, that the adapter has been active.
(Inherited from AdapterBase) |
|
|
Settings |
Gets settings DictionaryTKey, TValue parsed when ConnectionString was assigned.
(Inherited from AdapterBase) |
|
|
StartTime |
Gets the UTC time this AdapterBase was started.
(Inherited from AdapterBase) |
|
|
StartTimeConstraint |
Gets the start time temporal processing constraint defined by call to SetTemporalConstraint(String, String, String).
(Inherited from AdapterBase) |
|
|
Status |
Returns the detailed status of the data input source.
(Overrides FacileActionAdapterBaseStatus) |
|
|
StopTime |
Gets the UTC time this AdapterBase was stopped.
(Inherited from AdapterBase) |
|
|
StopTimeConstraint |
Gets the stop time temporal processing constraint defined by call to SetTemporalConstraint(String, String, String).
(Inherited from AdapterBase) |
|
|
SupportsTemporalProcessing |
Gets the flag indicating if this adapter supports temporal processing.
(Overrides AdapterBaseSupportsTemporalProcessing) |
|
|
TargetParentDevices | Gets or sets the flag that determines if alarm states should only target parent devices, i.e., PDCs and direct connect PMUs, or all devices. |
|
|
TrackLatestMeasurements |
Gets or sets flag to start tracking the absolute latest received measurement values.
(Inherited from FacileActionAdapterBase) |
|
|
UseLocalClockAsRealTime |
Gets or sets flag that determines whether or not to use the local clock time as real time.
(Inherited from FacileActionAdapterBase) |
See Also