|
Synchronized
|
The SynchronizedSubscriptionInfo type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
|
AllowPreemptivePublishing | Gets or sets the flag that determines whether frames should be published as soon as the data is available. If false, frames will be published when their timestamp expires (realTime > timestamp + lagTime). |
|
|
AllowSortsByArrival | Gets or sets the flag that determines whether to allow measurement sorting based on the measurement's time of arrival, if its timestamp is unreasonable. |
|
|
ConstraintParameters |
Gets or sets the additional constraint parameters
supplied to temporal adapters in a temporal session.
(Inherited from SubscriptionInfo) |
|
|
DataChannelLocalPort |
Gets or sets the port number that the UDP data channel binds to.
This value is only used when the subscriber requests a separate
UDP data channel.
(Inherited from SubscriptionInfo) |
|
|
DownsamplingMethod | Gets or sets the down-sampling method used when the frame rate of the subscription is lower than the frame rate of the measurement's source. |
|
|
ExtraConnectionStringParameters |
Gets or sets the additional connection string parameters to
be applied to the connection string sent to the publisher
during subscription.
(Inherited from SubscriptionInfo) |
|
|
FilterExpression |
Gets or sets the filter expression used to define which
measurements are being requested by the subscriber.
(Inherited from SubscriptionInfo) |
|
|
FramesPerSecond | Gets or sets the frame rate of the subscription in frames per second. |
|
|
IgnoreBadTimestamps | Gets or sets the flag that determines whether to ignore bad timestamps when sorting measurements. |
|
|
LagTime |
Gets or sets the allowed past time deviation
tolerance in seconds (can be sub-second).
(Inherited from SubscriptionInfo) |
|
|
LeadTime |
Gets or sets the allowed future time deviation
tolerance, in seconds (can be sub-second).
(Inherited from SubscriptionInfo) |
|
|
ProcessingInterval |
Gets or sets the processing interval requested by the subscriber.
A value of -1 indicates the default processing interval.
A value of 0 indicates data will be processed as fast as
possible.
(Inherited from SubscriptionInfo) |
|
|
RemotelySynchronized | Gets or sets the flag that determines whether this subscription is remotely synchronized or locally synchronized. |
|
|
RequestNaNValueFilter |
Gets or sets the flag that determines whether to request that measurements
sent to the subscriber should be filtered by the publisher prior to sending them.
(Inherited from SubscriptionInfo) |
|
|
StartTime |
Gets or sets the start time of the requested
temporal session for streaming historic data.
(Inherited from SubscriptionInfo) |
|
|
StopTime |
Gets or sets the stop time of the requested
temporal session for streaming historic data.
(Inherited from SubscriptionInfo) |
|
|
TimeResolution | Gets or sets the maximum time resolution, in ticks, to use when sorting measurements by timestamps into their proper destination frame. |
|
|
UdpDataChannel |
Gets or sets the flag that determines whether the subscriber
is requesting its data over a separate UDP data channel.
(Inherited from SubscriptionInfo) |
|
|
UseCompactMeasurementFormat |
Gets or sets the flag that determines whether to use the
compact measurement format or the full measurement format
for transmitting measurements to the subscriber.
(Inherited from SubscriptionInfo) |
|
|
UseLocalClockAsRealTime |
Gets or sets the flag that determines whether the server's
local clock is used as real-time. If false, the timestamps
of the measurements will be used as real-time.
(Inherited from SubscriptionInfo) |
|
|
UseMillisecondResolution |
Gets or sets the flag that determines whether measurement timestamps use
millisecond resolution. If false, they will use Ticks resolution.
(Inherited from SubscriptionInfo) |
See Also