GSFDeviceAlarmStateAdapter Class

SystemObject
  GSF.TimeSeries.AdaptersAdapterBase
    GSF.TimeSeries.AdaptersFacileActionAdapterBase
      GrafanaAdaptersGSFDeviceAlarmStateAdapter

public class GSFDeviceAlarmStateAdapter : FacileActionAdapterBase

Public Class GSFDeviceAlarmStateAdapter
	Inherits FacileActionAdapterBase

public ref class GSFDeviceAlarmStateAdapter : public FacileActionAdapterBase

type GSFDeviceAlarmStateAdapter =  
    class
        inherit FacileActionAdapterBase
    end

GrafanaAdapters.GSFDeviceAlarmStateAdapter = function();

Type.createClass(
	'GrafanaAdapters.GSFDeviceAlarmStateAdapter',
	GSF.TimeSeries.Adapters.FacileActionAdapterBase);

Request Example View Source

	Name	Description
	GSFDeviceAlarmStateAdapter	Creates a new GSFDeviceAlarmStateAdapter.

Top

	Name	Description
	AcknowledgedTransitionHysteresisDelay	Gets or sets delay time, in minutes, before transitioning the Acknowledged state back to Good.
	AlarmMinutes	Gets or sets the time, in minutes, for which to change the device state to alarm when no data is received.
	AutoStart	Gets or sets flag indicating if adapter should automatically start or otherwise connect on demand. (Inherited from AdapterBase.)
	ConnectionInfo	Gets connection info for adapter, if any. (Inherited from AdapterBase.)
	ConnectionString	Gets or sets key/value pair connection information specific to this AdapterBase. (Inherited from AdapterBase.)
	DataSource	Gets or sets DataSet based data source available to this AdapterBase. (Inherited from AdapterBase.)
	Enabled	Gets or sets enabled state of this AdapterBase. (Inherited from AdapterBase.)
	EnableExternalDatabaseSynchronization	Gets or sets the flag that determines if an external database connection should be enabled for synchronization of alarm states.
	ExternalDatabaseCommand	Gets or sets the external database command used for synchronization of alarm states.
	ExternalDatabaseCommandParameters	Gets or sets the external database command parameters with value substitutions used for synchronization of alarm states.
	ExternalDatabaseConnnectionString	Gets or sets the external database connection string used for synchronization of alarm states. Leave blank to use local configuration database defined in "systemSettings".
	ExternalDatabaseHysteresisDelay	Gets or sets the delay time, in minutes, before reporting the external database state.
	ExternalDatabaseHysteresisMinimumState	Gets or sets the minimum state for application of ExternalDatabaseHysteresisDelay. Defaults to setting Good and Alarm states immediately and applying delay to all other states.
	ExternalDatabaseMappedAlarmStates	Gets or sets the external database mapped alarm states defining the {MappedAlarmState} command parameter substitution parameter used for synchronization of alarm states.
	ExternalDatabaseProviderString	Gets or sets the external database provider string used for synchronization of alarm states.
	ExternalDatabaseReportSingleCompositeState	Gets or sets the flag that determines if external database should report a single composite state or a state for each device.
	FramesPerSecond	Gets or sets the frames per second to be used by the FacileActionAdapterBase. (Inherited from FacileActionAdapterBase.)
	ID	Gets or sets numeric ID associated with this AdapterBase. (Inherited from AdapterBase.)
	InitializationTimeout	Gets or sets maximum time system will wait during Start for initialization. (Inherited from AdapterBase.)
	Initialized	Gets or sets flag indicating if the adapter has been initialized successfully. (Inherited from AdapterBase.)
	InputMeasurementKeys	Gets or sets primary keys of input measurements the adapter expects, if any. (Overrides FacileActionAdapterBaseInputMeasurementKeys.)
	InputSourceIDs	Gets or sets Source values used to filter input measurement keys. (Inherited from FacileActionAdapterBase.)
	IsDisposed	Gets a flag that indicates whether the object has been disposed. (Inherited from AdapterBase.)
	LagTime	Gets or sets the allowed past time deviation tolerance, in seconds (can be sub-second). (Inherited from FacileActionAdapterBase.)
	LatestMeasurements	Gets reference to the collection of absolute latest received measurement values. (Inherited from FacileActionAdapterBase.)
	LeadTime	Gets or sets the allowed future time deviation tolerance, in seconds (can be sub-second). (Inherited from FacileActionAdapterBase.)
	Log	Log messages generated by an adapter. (Inherited from AdapterBase.)
	MeasurementReportingInterval	Gets or sets the measurement reporting interval. (Inherited from AdapterBase.)
	MonitoringRate	Gets or sets monitoring rate, in milliseconds, for devices.
	Name	Gets or sets the name of this AdapterBase. (Inherited from AdapterBase.)
	OutputMeasurements	Gets or sets output measurements that the adapter will produce, if any. (Overrides AdapterBaseOutputMeasurements.)
	OutputSourceIDs	Gets or sets Source values used to filter output measurements. (Inherited from FacileActionAdapterBase.)
	ProcessedMeasurements	Gets the total number of measurements handled thus far by the AdapterBase. (Inherited from AdapterBase.)
	ProcessingInterval	Gets or sets the desired processing interval, in milliseconds, for the adapter. (Inherited from AdapterBase.)
	RealTime	Gets the the most accurate time value that is available. If UseLocalClockAsRealTime = true, then this function will return UtcNow. Otherwise, this function will return the timestamp of the most recent measurement. (Inherited from FacileActionAdapterBase.)
	RequestedInputMeasurementKeys	Gets or sets input measurement keys that are requested by other adapters based on what adapter says it can provide. (Inherited from FacileActionAdapterBase.)
	RequestedOutputMeasurementKeys	Gets or sets output measurement keys that are requested by other adapters based on what adapter says it can provide. (Inherited from FacileActionAdapterBase.)
	RespectInputDemands	Gets or sets flag indicating if action adapter should respect auto-start requests based on input demands. (Inherited from FacileActionAdapterBase.)
	RespectOutputDemands	Gets or sets flag indicating if action adapter should respect auto-start requests based on output demands. (Inherited from FacileActionAdapterBase.)
	RunTime	Gets the total amount of time, in seconds, that the adapter has been active. (Inherited from AdapterBase.)
	Settings	Gets settings DictionaryTKey, TValue parsed when ConnectionString was assigned. (Inherited from AdapterBase.)
	StartTime	Gets the UTC time this AdapterBase was started. (Inherited from AdapterBase.)
	StartTimeConstraint	Gets the start time temporal processing constraint defined by call to SetTemporalConstraint(String, String, String). (Inherited from AdapterBase.)
	Status	Returns the detailed status of the data input source. (Overrides FacileActionAdapterBaseStatus.)
	StopTime	Gets the UTC time this AdapterBase was stopped. (Inherited from AdapterBase.)
	StopTimeConstraint	Gets the stop time temporal processing constraint defined by call to SetTemporalConstraint(String, String, String). (Inherited from AdapterBase.)
	SupportsTemporalProcessing	Gets the flag indicating if this adapter supports temporal processing. (Overrides AdapterBaseSupportsTemporalProcessing.)
	TargetParentDevices	Gets or sets the flag that determines if alarm states should only target parent devices, i.e., PDCs and direct connect PMUs, or all devices.
	TrackLatestMeasurements	Gets or sets flag to start tracking the absolute latest received measurement values. (Inherited from FacileActionAdapterBase.)
	UseLocalClockAsRealTime	Gets or sets flag that determines whether or not to use the local clock time as real time. (Inherited from FacileActionAdapterBase.)

Top

	Name	Description
	Dispose	Releases all the resources used by the AdapterBase object. (Inherited from AdapterBase.)
	Dispose(Boolean)	Releases the unmanaged resources used by the GSFDeviceAlarmStateAdapter object and optionally releases the managed resources. (Overrides AdapterBaseDispose(Boolean).)
	Equals	Determines whether the specified object is equal to the current object. (Inherited from Object.)
	Finalize	Releases the unmanaged resources before the AdapterBase object is reclaimed by GC. (Inherited from AdapterBase.)
	GetHashCode	Serves as a hash function for the current AdapterBase. (Inherited from AdapterBase.)
	GetShortElapsedTimeString
	GetShortStatus	Gets a short one-line status of this adapter. (Overrides AdapterBaseGetShortStatus(Int32).)
	GetType	Gets the Type of the current instance. (Inherited from Object.)
	IncrementProcessedMeasurements	Safely increments the total processed measurements. (Inherited from AdapterBase.)
	Initialize	Initializes GSFDeviceAlarmStateAdapter. (Overrides FacileActionAdapterBaseInitialize.)
	MemberwiseClone	Creates a shallow copy of the current Object. (Inherited from Object.)
	OnConfigurationChanged	Raises ConfigurationChanged event. (Inherited from AdapterBase.)
	OnDiscardingMeasurements	Raises the DiscardingMeasurements event. (Inherited from FacileActionAdapterBase.)
	OnInputMeasurementKeysUpdated	Raises InputMeasurementKeysUpdated event. (Inherited from AdapterBase.)
	OnNewMeasurements	Raises the NewMeasurements event. (Inherited from FacileActionAdapterBase.)
	OnOutputMeasurementsUpdated	Raises OutputMeasurementsUpdated event. (Inherited from AdapterBase.)
	OnProcessException(Exception)	Obsolete. Raises the ProcessException event. (Inherited from AdapterBase.)
	OnProcessException(MessageLevel, Exception, String, MessageFlags)	Raises the ProcessException event. (Inherited from AdapterBase.)
	OnStatusMessage(String)	Obsolete. Raises the StatusMessage event. (Inherited from AdapterBase.)
	OnStatusMessage(String, Object)	Obsolete. Raises the StatusMessage event with a formatted status message. (Inherited from AdapterBase.)
	OnStatusMessage(MessageLevel, String, String, MessageFlags)	Raises the StatusMessage event and sends this data to the Logger. (Inherited from AdapterBase.)
	OnUnpublishedSamples	Raises the UnpublishedSamples event. (Inherited from FacileActionAdapterBase.)
	QueueMeasurementForProcessing	Queues a single measurement for processing. (Inherited from FacileActionAdapterBase.)
	QueueMeasurementsForProcessing	Queues a collection of measurements for processing. (Inherited from FacileActionAdapterBase.)
	QueueStateUpdate	Queues monitoring operation to update alarm state for immediate execution.
	SetInitializedState	Manually sets the initialized state of the AdapterBase. (Inherited from AdapterBase.)
	SetTemporalConstraint	Defines a temporal processing constraint for the adapter. (Inherited from AdapterBase.)
	Start	Starts the AdapterBase or restarts it if it is already running. (Inherited from AdapterBase.)
	Stop	Stops the AdapterBase. (Inherited from AdapterBase.)
	ToString	Returns a string that represents the current object. (Inherited from Object.)
	UpdateAlarmStates	Updates alarm states from database.

Top

	Name	Description
	ConfigurationChanged	Event is raised when adapter is aware of a configuration change. (Inherited from AdapterBase.)
	DiscardingMeasurements	This event is raised if there are any measurements being discarded during the sorting process. (Inherited from FacileActionAdapterBase.)
	Disposed	Event is raised when AdapterBase is disposed. (Inherited from AdapterBase.)
	InputMeasurementKeysUpdated	Event is raised when InputMeasurementKeys are updated. (Inherited from AdapterBase.)
	NewMeasurements	Provides new measurements from action adapter. (Inherited from FacileActionAdapterBase.)
	OutputMeasurementsUpdated	Event is raised when OutputMeasurements are updated. (Inherited from AdapterBase.)
	ProcessException	Event is raised when there is an exception encountered while processing. (Inherited from AdapterBase.)
	StatusMessage	Provides status messages to consumer. (Inherited from AdapterBase.)
	UnpublishedSamples	This event is raised by derived class, if needed, to track current number of unpublished seconds of data in the queue. (Inherited from FacileActionAdapterBase.)

Top

	Name	Description
	DefaultAcknowledgedTransitionHysteresisDelay	Defines the default value for the AcknowledgedTransitionHysteresisDelay.
	DefaultAlarmMinutes	Defines the default value for the AlarmMinutes.
	DefaultExternalDatabaseHysteresisDelay	Defines the default value for the DefaultExternalDatabaseHysteresisDelay.
	DefaultMonitoringRate	Defines the default value for the MonitoringRate.

Top

Reference

GrafanaAdapters Namespace